Selkirk


Multifuel

Chimney System

Twin Wall, Insulated

Stainless Steel





SM NOVA

The Selkirk SM Nova is a highly insulated twin wall chimney system designed for heating appliances, but particularly suitable for modern combustion equipment where condensation and pressure conditions are present within the flue gas environment. It is available in diameters ranging 130mm - 600mm. Diameters 130mm - 350mm have an optional seal which will resist pressures to 1000 Pascal, at temperatures up to 200C. SM Nova is provided with a range of fittings and support components.



Oil & Gas

Chimney System

Twin wall, Insulated

Stainless Steel


 

SMW   The Selkirk SMW is a twin wall mineral-wool insulated stainless steel system designed for use with oil and gas fuels. It is available with a full range of fittings and accessories in twelve diameters ranging from 127mm to 600mm. Diameters of 127mm to 203mm are specially manufactured, tested and Kitemarked to BS 4543 Part 3 for use with oil and gas fired equipment.



Multifuel

Chimney System

(esp. Solid Fuel)

Twin Wall, Insulated

Stainless Steel

SM   The Selkirk SM is a twin wall special powder insulated stainless steel chimney system designed for use with all fuels and purpose manufactured, tested and Kitemarked to BS 4543 Part 2 for use with solid fuel fired equipment. It is available with a full range of fittings and accessories in four normal diameters ranging 125mm to 200mm.




Commercial Gas

Vent System

Twin Wall

Air Gap Insulated

Zalutite and Aluminium



   

 

QC

 The Selkirk QC system comprises a range of prefabricated Zalutite outer, aluminium inner, twin wall vent pipe lengths and fittings for use over gas fired appliances. These must be draught- hooded, have a flue gas temperature not exceeding 260C, and have zero or negative pressure in the flue. Such appliances include cooking equipment, central heating boilers, modular boilers, small furnaces, water heaters and unit air heaters. The system is available with a full range of fittings and accessories in10 sizes form 178mm to 600mm





Residential

Gas Vent System

Twin Wall

Air Gap Insulated

Zalutite and Aluminium

IL

The Selkirk IL comprises straight pipe lengths and associated fittings and accessories constructed with an aluminium liner protected by an outer casting of Zalutite. Components easily lock together providing a strong rigid system. Three diameters, 100mm,125mm and 150mm.Suitable for gas appliances, typically in domestic or small commercial application. May also be used for 28 sec, oil fired appliances. Whichever fuel, the appliance must always be draught-hooded, the gas temperature must not exceed 260C, and there must be a zero or negative pressure in the flue. Manufactured, tested and Kitemarked to BS 715 1989.



Economical

Flue System

Single Wall

Stainless Steel



 

SW

The Selkirk SW, a single wall stainless steel flue system for gas and oil-fired air heaters, gas fired ceiling heaters, warm air lowers and gas appliance connection. Designed for use with flue gas temperatures up to a maximum of 260C, the product is available with a range of fittings and accessories in 8 sizes from 125mm to 350mm.